DRAIN TRAPS FOR
GASEOUS SYSTEMS – AVDT Series
Available in sizes from 1/2″ NPT to 1″ npt for operating pressures up to 250 psig gaseous service at temperatures up to 250 deg. F. and specific gravities down to 0.95.
For installation at the low points of compressed air aftercoolers, separators, storage tanks, filters and compressed air mains to allow for the removal of accumulated condensate.
AVDT Models are:
Model AVDT-150: for service pressures up to 150 psig
Model AVDT-250: for service pressures up to 250 psig
PMO: (maximum operating pressure): See below chart
TMO: (maximum operating temperature): 338°F
(For higher operating temperatures, contact factory)
● Continuous discharge of liquids, with specific gravities greater
than 0.7, allowing for full drainage of the gaseous system.
● The plugged 1/2″ connection in the cover can be outfitted with a full bore ball valve to allow for manual by-pass or blow-down.